> For the complete documentation index, see [llms.txt](https://docs.orb360.tech/orb360-documentation/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.orb360.tech/orb360-documentation/computer_setup/systems-settings.md).

# Systems Settings

Infomation on how to setup a ORB360 Computer

First, navigate to the download page of the Teamviewer site, and follow the instructions to install the software.

1: Go to 'Systems Preferences/Systems Settings' -> 'General/Appearance'\
2: Set appearance mode to 'Dark'\
3: Go to 'Systems Preferences/Systems Settings' -> 'Screen Saver'\
4: Screen saver = Drift\
5: Screen saver = 10 min\
6: Go to 'Systems Preferences/Systems Settings' -> 'Battery'\
7: Display off after 20 min on battery\
8: Display off after 20 min on the power adapter\
9: Prevent Mac from sleeping when the display is off\
10: Wake for network access

{% embed url="<https://www.canon.co.uk/support/consumer_products/software/eos-utility.html>" %}

Download EOS Utility\
Set to 'Do not launch EOS Utility automatically when camera is connected

{% embed url="<https://www.arduino.cc/en/software>" %}

Download Arduino\
1: Go to 'Tools' -> 'Board'\
2: Select 'Arduino Mega or Mega 2560'\
3: Go to 'Tools' -> 'Port'\
4: Select the port labeled USB\
5: Go to 'Tools' -> 'Serial Monitor'\
6: Select 'Buad Rate' to '115200'