# Camera Setup

Turn "Auto rotate" Off

![](/files/-MYzgaimlj2rqWY8RaJ9)

Disable the camera "Auto power off", this prevents the camera from going to sleep which causes it to disconnect from the software.

![](/files/-MYzge7OPOt54Xs17bMC)

Set the camera to single-point focus. To focus the camera, switch to autofocus mode, focus on the model/item, then switch back to manual.

![](/files/-MYzeUJ8PVApiNhSJSq5)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.orb360.tech/orb360-documentation/camera/camera-setup.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.